top of page

Five Things To Know About Floor Refinishing


There's no question that to refinish hardwood floors in your home is a huge facelift to your room; it's rejuvenating, making things look brand new. And in most cases, the cost of refinishing compared to replacing is cheaper. Also, as wood is a natural product, natural variations are a big part of its appeal, and these can be highlighted when refinishing hardwood floors. It's all part of the character of the wood and home. No amount of modern manufacturing can replicate original hardwood floors. Whether you have some well-loved wood floors to revitalize or carpeting has been hiding your hardwood and you want to consider hardwood floor refinishing, there are five main things you need to know about.


Floor Sanding Tips-Ireland

1. Hardwood Floor Cleaning

  • Restoring dirty hardwood floors that have no sheen left can seem straightforward; a good deep cleaning can restore their former glory. It will require sweeping and vacuuming, mopping with concentrated cleaners; and then ongoing work to keep the floor in tip-top shape.

  • If that wasn't successful, your wood floor can be refinished even without sanding, using certain products.

  • Some hardwood floors are beyond a quick fix because getting the job done is lengthy and labor-intensive.

2. Prepping the Floor and Room for Wood Floor Maintenance

  • Everything needs removal; remember, anything that is left inside will be exposed to plenty of dust and debris.

  • Check that the room will be sealed off as much as possible so no dust spreads through the house.

  • Check that all vents, doorways, and electrical outlets that will need to be covered.

  • If necessary, thoroughly sweep and mop the floor to clean it before refinishing.

3. Sanding and Refinishing Doesn't Fix Gaps

  • For your information - quality hardwood floors can be sanded down and refinished up to about five times before needing to be replaced.

  • People ask if it's possible to refinish a floor without sanding it. But frankly, if floors are not sanded, the staining doesn't penetrate the hardwood correctly.

  • If the floors are damaged, for example, a more aggressive sanding tool might be required to smooth out the floors.

  • If you notice gaps between the boards before the job will be started, those gaps will still be there afterward - some minor gaps might improve with refinishing.

  • It is also good to remember that there are likely to be color variations in the boards and some knots. Sometimes it's not possible to see these until after finishing coats have been applied, but the wood floor color trends will truly bring out the floor's uniqueness and beauty.

  • After sanding the floors, the powdery dust will be allowed to settle on the floor from the air, then be vacuumed out, and finally dry-tacking the floor with soft microfiber cloths.

4. Updating Your Hardwood Floor with a New Color

  • When a hardwood floor starts showing wear and tear, you need to refinish it. With all that time and effort, you want to make sure that your floor looks amazing. It's best to let the work be carried out by professionals.

  • After sanding down the floor to its natural state, you have the opportunity to change the appearance of the floor radically with a new color. Some people like the hardwood floor color stains as they believe it enhances the natural color of the wood. Here too, you might not find the exact color for your needs; hardwood darkens over time; nevertheless, hardwood floors can be made darker or lighter. Give us a call today for an advice needed.

  • Cleaning products also can make a difference in the color. If the same color was used in another section and then compared it to flooring that was refinished 5-10 years ago, it's not going to be exact, but fairly close.

5. Expect to Repaint the Skirting after Hardwood Refinishing

  • Sanding and refinishing is going to scuff up the skirting boards and you will get some stain and colour on them - they will need painting afterwards. The same applies to the steps, stair risers, stringers, and spindles.

  • If the carpeting was removed off the floor, there might be gaps where the paint on the skirtings is missing. The walls, too, might get scuffed because the edgers will need to get to the floor edges but this is a rare occurrence.

  • Plan on painting, but only after the floors have been refinished. If you plan on skirtings to be replaced, please note they need to be removed before refinishing the floors and installing them after refinishing.

  • To have your floors sanded correctly, its best to leave it to the professional as its a labour intensive process with a lot of skill required.

104 views1 comment

1 Comment


Michelle Catapang
Michelle Catapang
May 02, 2023

Thank you for providing us with this information. Very well detailed and informative!

Like
bottom of page